Type E Insulation Gasket Kit for FF Flange

• Customization: Available
• Type: Flat Gasket
• Material: Stainless Steel
• Model NO.: JT-D09
• Combination Washer Structure: O Sharp
• Combination Washer Packaging: N/a
• Spring Washer Type: N/a
• Insulation Gasket Set: Type E, Type F, Type D
• Type E: for Full Face
• Type F: for Raise Face
• Type D: for Rtj High Pressure
• Transport Package: Paper Box/Carton/Wooden Case
• Specification: standard/drawing
• Trademark: J top
• Origin: China
• HS Code: 8484900000
• Production Capacity: 500000/Month
• Package Size: 15.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 1.000kg

Product Description

Type E insulation gasket kit for FF flange
D type RTJ insulation Kit for high pressure -type D
Pipe flange insulation set 
Insulation set TYPE D TYPE E TYPE F /
     The insulation set  is composed of an insulating gasket, a bushing for each bolt, an insulating gasket for each nut, and a steel gasket. The insulation group is used in two pipeline flanges of different materials to prevent corrosion and fully conductive insulation protection. It is suitable for offshore insulation, seawater environment, hydrocarbons, chemical insulation, oil refineries and pipelines.
Purpose: In order to prevent the loss of protection current and interference to unprotected metal pipelines and equipment, install flange insulation gasket sets at the inlet and outlet of pumping stations and oil depots to prevent cathodic protection current from entering the main line. Flange insulation gasket set can also be used in the section with underground stray current and the connection of different pipelines (different materials, new and old pipelines, etc.) as an anti-corrosion measure
Type: D type, E type, RTJ type F type
Material: Nitrile rubber, neoprene rubber, phenolic resin, stainless steel composite, etc. can be produced
Please consult our company for details.
Gasket parameters:

	phenolic resin	Chloroprene rubber composite phenolic resin	Reinforced PTFE	G-7	G-10	G-11
Insulation strength volts / mill	500	500	350	350	550	550
Compressive strength PSI	25000	25000	2300	40000	50000	50000
Water absorption%	1.6	1.6	0.01	0.07	0.1	0.1
Rebound rate PSI	20000	20000	1450	25000	45000	43000
Operating temperature ° f	-65 to+220	-65 to+175	-320 to+500	-320 to+450	-320 to+280	-320 to+349
Operating temperature ° C	-54 to+104	-54 to+79	-320 to+500	-320 to+450	-320 to+280	-320 to+349

Sealing part parameters

	Nitrile rubber	Fluororubber	Tetrafluoro	Neoprene	EPDM rubber
Operating Temp. ° F	-40 to+250	-20 to+350	-320(-20)to+500(+350)	-320 to+450	-320 to+280
Operating Temp. ° C	-40to+121	-29to+177	-196(-29) to+232(+177)	-320 to+450	-320 to+280

Sleeve parameters:

	Mylar	Nomex	G7 Silicone Glass	G10 Expoxy/Glass	G-11 Expoxy/Glass
Insulation strength volts / mill	4000	400	350	400	400
Water absorption%	1.6	0.8	N/A	0.1	0.1
Operating temperature ° f	-79 to+300	-65 to+450	-320 to+450	-320 to+280	-320 to+349
Operating temp°C	-59 to+149	-54 to+232	-196 to+232	-196 to+138	-196 to+176

Insulation washer parameters:

	phenolic resin	G-7	G-10	G-11
Insulation strength volts / mill	500	350	550	550
Compressive strength PSI	25000	40000	50000	50000
Water absorption%	1.6	0.07	0.1	0.1
Rebound rate PSI	20000	25000	45000	43000
Operating temperature ° f	-65 to+220	-320 to+450	-320 to+280	-320 to+349
Operating temperature ° C	-54 to+104	-196to+232	-196 to+138	-196to+176